Added Checkout

 

ISP Technologies Decimator II G-String

ISP Technologies

CB1326

SHIPPING FEES

3 items left

High gain-pedals and -amplifiers always add a dose of unwanted hiss to your signal. Your guitar’s pickups can also be prone to electromagnetic interference or hum, or even have a tendency to feed back. The worst case scenario would be a guitar squealing uncontrollably, or a guitar sound where the noise and hiss is louder than the actual guitar signal itself. The correct tool is a noise suppressor, which detects which part of the signal is the actual guitar playing and which is unwanted noise.

We only carry noise suppressors with the most accurate tracking. Especially the newest ISP Decimator models work very efficiently and imperceptibly, which puts them lightyears from the annoyingly choppy noise gates from the 1980s. You can use noise suppressors in several different ways. Go and check out the different hook up schematics included in the product info.

A highly-advanced noise suppressor. The Decimator II is a new and improved version, offering innovative improvements in the field of noise suppression. Special care has been given to make sure long notes fade out naturally, without any stuttering. We recommend placing the Decimator II after your distortion pedals and in front of your delay and reverb units.

The G-String-version features built-in send- and return-jacks, allowing you to connect the noise suppressor to your amp's effects loop. This way you can filter your high-gain amplifier's own noise, along with any noise coming off your effect pedals. The G-String tracks your guitar signal directly, meaning you don't need to change your threshold-settings, even when switching from high-gain distortion to a clean amp channel.

    Controls:
    Threshold: adjusts the noise gate's threshold. Set the initial threshold level by listening to your noise floor without playing your guitar. Turn the Threshold knob CW, until all hiss and/or hum disappears. In some cases a little fine- tuning of the threshold level is needed with the guitar's own volume control fully open.
    Link In and Link Out: you can link two Decimator-pedals by connecting their Link-jacks with a 1/8' TRS-cable. Using the Link-function you could, for example, have the Decimator connected to the amp's loop also track the guitar signal directly. Read the manual for detailed instructions.
    • Power requirements: 2.1 mm 9V DC centre negative power supply or 9 V battery. 35 mA.
    • Buffered bypass
    • Made in South Korea

    CLICK HERE TO READ THE MANUAL ISP DECIMATOR II G-STRING


    Collections: Effects, ISP Technologies

    Category: Noise reduction

    Shipping Fees

    EU

    Outside EU

    If you shop from outside the European Union, you will see all prices VAT 0 % at the checkout.

    Gibraltar, Iceland, Norway, Switzerland

    Rest of the world

    Fast delivery